Esame 200-101 ICND2 Interconnecting Cisco Networking Devices Part 2

L’esame Cisco 200-101 Interconnecting Cisco Networking Devices Part 2 (ICND2) è l’esame associato con la certificazione CCNA Routing e Switching.

L’esame verifica la conoscenza e le competenze necessarie per la corretta installazione, funzionamento e risoluzione dei problemi di una rete aziendale di medie dimensioni rete che include anche filiali. L’esame comprende argomenti su tecnologie LAN switching, tecnologie di routing IP, servizi IP (FHRP, syslog, SNMP V2 e V3), risoluzione dei problemi le le tecnologie WAN.

Domande: 50-60
Durata: 75 + 30 minuti per i non madrelingua inglese
Costo: 137 euro
Data ritiro: 24 settembre 2016
Status: RITIRATO
Sostituito da: 200-105 ICND2 3.0

1.0 LAN Switching Technologies

Peso 21%

1.1 Identify enhanced switching technologies

  • 1.1.a RSTP
    • 1.1.b PVSTP
  • 1.1.c EtherChannels

1.2 Configure and verify PVSTP operation

  • 1.2.a Describe root bridge election
  • 1.2.b Spanning tree mode

2.0 IP Routing Technologies

Peso 26%

2.1 Describe the boot process of Cisco IOS routers
2.2 Configure and verify the operation status of a serial interface
2.3 Manage Cisco IOS files

  • 2.3.a Boot Preferences
  • 2.3.b Cisco IOS Images (15)
  • 2.3.c Licensing
    • 2.3.c [i] Show license
    • 2.3.c [ii] Change license

2.4 Differentiate methods of routing and routing protocols

  • 2.4 a Administrative distance
  • 2.4.b Split horizon
  • 2.4.c Metric
  • 2.4.d Next hop

2.5 Configure and verify OSPF (multi-area)

  • 2.5.a Neighbor adjacencies
  • 2.5.b OSPF states
  • 2.5.c Configure OSPv2
  • 2.5.d Configure OSPv3
  • 2.5.e Router ID
  • 2.5.f Understand LSA types and purpose

2.6 Configure and verify EIGRP (single AS)

  • 2.6.a Feasible distance/feasible successors/administrative distance
  • 2.6.b Feasibility condition
  • 2.6.c Metric composition
  • 2.6.d Router ID
  • 2.6.e auto summary
  • 2.6.f Path Selection
  • 2.6.g Load Balancing
    • 2.6.g [i] Unequal
    • 2.6.g [ii] Equal

2.7 Passive Interface

3.0 IP Services

Peso 6%

3.1 Recognize high availability (FHRP)

  • 3.1.a VRRP
  • 3.1.b HSRP
  • 3.1.c GLBP

3.2 Configure and verify syslog

  • 3.2.a Utilize syslog output

3.3 Describe SNMP v2 and v3

4.0 Troubleshooting

Peso 32%

4.1 Identify and correct common network problems
4.2 Utilize netflow data
4.3 Troubleshoot and resolve spanning tree operation issues

  • 4.3.a Verify root switch
  • 4.3.b Verify priority
  • 4.3.c Verify mode is correct
  • 4.3.d Verify port states

4.4 Troubleshoot and resolve routing issues

  • 4.4.a Verify routing is enabled (extenSible and Hierarchical Interaction Protocol(SHIP))
  • 4.4.b Verify routing table is correct
  • 4.4.c Verify correct path selection

4.5 Troubleshoot and resolve OSPF problems

  • 4.5.a Verify neighbor adjacencies
  • 4.5.b Verify hello and dead timers
  • 4.5.c Verify OSPF area
  • 4.5.d Verify interface MTU
  • 4.5.e Verify network types
  • 4.5.f Verify neighbor states
  • 4.5.g Review OSPF topology table

4.6 Troubleshoot and resolve EIGRP problems

  • 4.6.a Verify neighbor adjacencies
  • 4.6.b Verify AS number
  • 4.6.c Verify load balancing
  • 4.6.d Verify split horizon

4.7 Troubleshoot and resolve inter VLAN routing problems

  • 4.7 a Verify connectivity
  • 4.7.b Verify encapsulation
  • 4.7.c Verify subnet
  • 4.7.d Verify native VLAN
  • 4.7.e Port mode trunk status

4.8 Troubleshoot and resolve WAN implementation issues

  • 4.8.a serial interfaces
  • 4.8.b frame relay
  • 4.8.c PPP

4.9 Monitor NetFlow statistics

4.10 TS EtherChannel problems

5.0 WAN Technologies

Peso 15%

5.1 Identify different WAN Technologies

  • 5.1.a metro ethernet
  • 5.1.b vsat
  • 5.1.c cellular 3g/4g
  • 5.1.d MPLS
  • 5.1.e T1/E1
  • 5.1.f ISDN
  • 5.1.g DSL
  • 5.1.h frame relay
  • 5.1.i cable
  • 5.1.j VPN

5.2 Configure and verify a basic WAN serial connection
5.3 Configure and verify a PPP connection between Cisco routers
5.4 Configure and verify Frame Relay on Cisco routers
5.5 Implement and troubleshoot PPPoE

Giovanni Perteghella (98 Posts)

Giovanni Perteghella è un'istruttore certificato Cisco CCSI#32156, Cisco CCAI, VMware VCI e VMware vITA. Attualmente vive in Italia, tiene corsi e attività di consulenza in Europa e USA. Le aree primaria di interesse sono il Voice, Datacenter oltre al Routing&Switching e Wireless. Ama il mondo Apple da quando possiede il suo primo Apple ][ a 48KB


Rispondi

Questo sito usa Akismet per ridurre lo spam. Scopri come i tuoi dati vengono elaborati.