Esame 200-105 v3.0 ICND2 Interconnecting Cisco Networking Devices Part 2

L’esame Cisco 200-105 Interconnecting Cisco Networking Devices Part 2 (ICND2) è l’esame associato con la certificazione CCNA Routing e Switching.

L’esame verifica la conoscenza e le competenze necessarie per la corretta installazione, funzionamento e risoluzione dei problemi di una rete aziendale di medie dimensioni rete che include anche filiali. L’esame comprende argomenti su tecnologie LAN switching, tecnologie di routing IP, servizi IP (FHRP, syslog, SNMP V2 e V3), risoluzione dei problemi le le tecnologie WAN.

Domande: 45-55
Durata: 90 + 30 minuti per i non madrelingua inglese
Costo: 137 euro

1.0 LAN Switching Technologies

Peso 26%

1.1 Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches

  • 1.1.a Access ports (data and voice)
  • 1.1.b Default VLAN

1.2 Configure, verify, and troubleshoot interswitch connectivity

  • 1.2.a Add and remove VLANs on a trunk
  • 1.2.b DTP and VTP (v1&v2)

1.3 Configure, verify, and troubleshoot STP protocols

  • 1.3.a STP mode (PVST+ and RPVST+)
  • 1.3.b STP root bridge selection

1.4 Configure, verify, and troubleshoot STP-related optional features

  • 1.4.a PortFast
  • 1.4.b BPDU guard

1.5 Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel

  • 1.5.a Static
  • 1.5.b PAGP
  • 1.5.c LACP

1.6 Describe the benefits of switch stacking and chassis aggregation

1.7 Describe common access layer threat mitigation techniques

  • 1.7.a 802.1x
  • 1.7.b DHCP snooping
  • 1.7.c Nondefault native VLAN

2.0 Routing Technologies

Peso 29%

2.1 Configure, verify, and troubleshoot Inter-VLAN routing

  • 2.1.a Router on a stick
  • 2.1.b SVI

2.2 Compare and contrast distance vector and link-state routing protocols

2.3 Compare and contrast interior and exterior routing protocols

2.4 Configure, verify, and troubleshoot single area and multiarea OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

2.5 Configure, verify, and troubleshoot single area and multiarea OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

2.6 Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)

2.7 Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)

3.0 WAN Technologies

Peso 16%

3.1 Configure and verify PPP and MLPPP on WAN interfaces using local authentication

3.2 Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication

3.3 Configure, verify, and troubleshoot GRE tunnel connectivity

3.4 Describe WAN topology options

  • 3.4.a Point-to-point
  • 3.4.b Hub and spoke
  • 3.4.c Full mesh
  • 3.4.d Single vs dual-homed

3.5 Describe WAN access connectivity options

  • 3.5.a MPLS
  • 3.5.b MetroEthernet
  • 3.5.c Broadband PPPoE
  • 3.5.d Internet VPN (DMVPN, site-to-site VPN, client VPN)

3.6 Configure and verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)

4.0 Infrastructure Services

Peso 14%

4.1 Configure, verify, and troubleshoot basic HSRP

  • 4.1.a Priority
  • 4.1.b Preemption
  • 4.1.c Version

4.2 Describe the effects of cloud resources on enterprise network architecture

  • 4.2.a Traffic path to internal and external cloud services
  • 4.2.b Virtual services
  • 4.2.c Basic virtual network infrastructure

4.3 Describe basic QoS concepts

  • 4.3.a Marking
  • 4.3.b Device trust
  • 4.3.c Prioritization
    • 4.3.c. [i] Voice
    • 4.3.c. [ii] Video
    • 4.3.c. [iii] Data
  • 4.3.d Shaping
  • 4.3.e Policing
  • 4.3.f Congestion management

4.4 Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering

  • 4.4.a Standard
  • 4.4.b Extended
  • 4.4.c Named

4.5 Verify ACLs using the APIC-EM Path Trace ACL analysis tool

5.0 Infrastructure Maintenance

Peso 15%

5.1 Configure and verify device-monitoring protocols

  • 5.1.a SNMPv2
  • 5.1.b SNMPv3

5.2 Troubleshoot network connectivity issues using ICMP echo-based IP SLA

5.3 Use local SPAN to troubleshoot and resolve problems

5.4 Describe device management using AAA with TACACS+ and RADIUS

5.5 Describe network programmability in enterprise network architecture

  • 5.5.a Function of a controller
  • 5.5.b Separation of control plane and data plane
  • 5.5.c Northbound and southbound APIs

5.6 Troubleshoot basic Layer 3 end-to-end connectivity issues

Giovanni Perteghella (98 Posts)

Giovanni Perteghella è un'istruttore certificato Cisco CCSI#32156, Cisco CCAI, VMware VCI e VMware vITA. Attualmente vive in Italia, tiene corsi e attività di consulenza in Europa e USA. Le aree primaria di interesse sono il Voice, Datacenter oltre al Routing&Switching e Wireless. Ama il mondo Apple da quando possiede il suo primo Apple ][ a 48KB


Rispondi

Questo sito usa Akismet per ridurre lo spam. Scopri come i tuoi dati vengono elaborati.