Esame 300-425 ENWLSD - Designing Cisco Enterprise Wireless Networks

Giovanni Perteghella
Cisco, Design, Enterprise, Wireless
2020-02-25 - 400 parole - tempo di lettura 2 minuti

Codice Esame : 300-425 ENWLSD
versione : 1
Vendor : Cisco

This exam tests your knowledge of wireless network design, including: Site surveys Wired and wireless infrastructure Mobility WLAN high availability

Area : Design Enterprise Wireless
Status : Active
Esame iniziato il: 24-02-2020 terminato il :

Durata (minuti): 90
Domande : min None - max None

Punteggio : min: - max: -
Costo :

Exam topics:

  • 1.0 - Wireless Site Survey - 25%

    • 1.1 - Collect design requirements and evaluate constraints
    • 1.1.a - Client density
    • 1.1.b - Real time applications
    • 1.1.c - AP type
    • 1.1.d - Deployment type (data, location, voice, video)
    • 1.1.e - Security
    • 1.2 - Describe material attenuation and its effect on wireless design
    • 1.3 - Perform and analyze a Layer 1 site survey
    • 1.4 - Perform a pre-deployment site survey
    • 1.5 - Perform a post deployment site survey
    • 1.6 - Perform a predictive site survey
    • 1.7 - Utilize planning tools and evaluate key network metrics (Ekahau, AirMagnet, PI, Chanalyzer, Spectrum Analyzer)

  • 2.0 - Wired and Wireless Infrastructure - 30%

    • 2.1 - Determine physical infrastructure requirements such as AP power, cabling, switch port capacity, mounting, and grounding
    • 2.2 - Determine logical infrastructure requirements such as WLC/AP licensing requirements based on the type of wireless architecture
    • 2.3 - Design radio management
    • 2.3.a - RRM
    • 2.3.b - RF profiles
    • 2.3.c - RxSOP
    • 2.4 - Apply design requirements for these types of wireless networks
    • 2.4.a - Data
    • 2.4.b - Voice and video
    • 2.4.c - Location
    • 2.4.d - Hyperlocation
    • 2.5 - Design high-density wireless networks and their associated components (campus, lecture halls, conference rooms)
    • 2.6 - Design wireless bridging (mesh)
    • 2.6.a - Modes of operation
    • 2.6.b - Ethernet bridging
    • 2.6.c - WGB and roaming

  • 3.0 - Mobility - 25%

    • 3.1 - Design mobility groups based on mobility roles
    • 3.2 - Optimize client roaming
    • 3.3 - Validate mobility tunneling for data and control path

  • 4.0 - WLAN High Availability - 20%

    • 4.1 - Design high availability for controllers
    • 4.1.a - Network availability through LAG
    • 4.1.b - Stateful Switchover (SSO)
    • 4.1.c - Anchor controller priority and redundancy
    • 4.2 - Design high availability for APs
    • 4.2.a - AP prioritization
    • 4.2.b - Fall-back (assigning primary, secondary, and tertiary)

Link all’esame sul sito ufficiale 300-425 ENWLSD - Designing Cisco Enterprise Wireless Networks

Reference ID: 77