Esame 350-801 CLCOR Implementing Cisco Collaboration Core Technologies

Giovanni Perteghella
Cisco, Collaboration
2020-02-27 - 700 parole - tempo di lettura 4 minuti

Codice Esame : 350-801 CLCOR
versione : None
Vendor : Cisco

This exam tests your knowledge of implementing core collaboration technologies, including: Infrastructure and design Protocols, codecs, and endpoints Cisco IOS XE gateway and media resources Call Control QoS Collaboration applications

Area : Collaboration
Status : Active
Esame iniziato il: 24-02-2020 terminato il :

Durata (minuti): 120
Domande : min None - max None

Punteggio : min: - max: -
Costo :

Exam topics:

  • 1.0 - Infrastructure and Design - 20%

    • 1.1 - Describe the key design elements of the following, pertaining to the Cisco Collaboration architecture as described in the SRND/PA
    • 1.1.a - Licensing (Smart, Flex)
    • 1.1.b - Sizing
    • 1.1.c - Bandwidth
    • 1.1.d - High availability
    • 1.1.e - Disaster recovery
    • 1.1.f - Dial plan
    • 1.1.g - Security (certificates, SRTP, TLS)
    • 1.1.h - QoS
    • 1.2 - Describe the purpose of Edge devices in the Cisco Collaboration architecture such as Expressway and Cisco Unified Border Element
    • 1.3 - Configure these network components to support Cisco Collaboration solutions
    • 1.3.a - DHCP
    • 1.3.b - NTP
    • 1.3.c - CDP
    • 1.3.d - LLDP
    • 1.3.e - LDAP
    • 1.3.f - TFTP
    • 1.3.g - Certificates
    • 1.4 - Troubleshoot these network components in a Cisco Collaboration solution
    • 1.4.a - DNS (A/AAA, SRV, Reverse Pointer Record (PTR))
    • 1.4.b - NTP
    • 1.4.c - LDAP integration on Cisco Unified Communications Manager
    • 1.5 - Explain these components to support Cisco Collaboration solutions
    • 1.5.a - SNMP
    • 1.5.b - DNS

  • 2.0 - Protocols, Codecs, and Endpoints - 20%

    • 2.1 - Troubleshoot these elements of a SIP conversation
    • 2.1.a - Call set up and tear down
    • 2.1.b - SDP
    • 2.1.c - DTMF
    • 2.2 - Identify the appropriate collaboration codecs for a given scenario
    • 2.3 - Configure codec negotiations
    • 2.4 - Deploy SIP endpoints
    • 2.4.a - Manual
    • 2.4.b - Self provisioning
    • 2.4.c - Bulk Administration Tool (BAT)
    • 2.5 - Troubleshoot collaboration endpoints

  • 3.0 - Cisco IOS XE Gateway and Media Resources - 15%

    • 3.1 - Configure these voice gateway elements
    • 3.1.a - DTMF
    • 3.1.b - Voice translation rules and profiles
    • 3.1.c - Codec preference list
    • 3.1.d - Dial peers
    • 3.2 - Configure ISDN PRI/BRI
    • 3.3 - Troubleshoot ISDN PRI/BRI
    • 3.4 - Configure and verify the MGCP
    • 3.5 - Identify the appropriate media resources for a given scenario (hardware and software)

  • 4.0 - Call Control - 25%

    • 4.1 - Describe the Cisco Unified Communications Manager digit analysis process
    • 4.2 - Implement toll fraud prevention on Cisco Unified CM
    • 4.3 - Configure globalized call routing in Cisco Unified CM
    • 4.3.a - Route patterns (traditional and +E.164 format)
    • 4.3.b - Translation patterns
    • 4.3.c - Standard local route group
    • 4.3.d - Transforms
    • 4.3.e - SIP route patterns
    • 4.4 - Describe Mobile and Remote Access (MRA)

  • 5.0 - QoS - 10%

    • 5.1 - Describe problems that can lead to poor voice and video quality
    • 5.1.a - Latency
    • 5.1.b - Jitter
    • 5.1.c - Packet loss
    • 5.1.d - Bandwidth
    • 5.2 - Describe the QoS requirements for these application types (voice and video)
    • 5.3 - Describe the class models for providing QoS on a network
    • 5.3.a - 4/5 Class model
    • 5.3.b - 8 Class model
    • 5.3.c - QoS Baseline model (11 Class)
    • 5.4 - Describe the purpose and function of these DiffServ values as it pertains to collaboration
    • 5.4.a - EF
    • 5.4.b - AF41
    • 5.4.c - AF42
    • 5.4.d - CS3
    • 5.4.e - CS4
    • 5.5 - Describe QoS trust boundaries and their significance in LAN-based classification and marking
    • 5.6 - Describe and determine location-based CAC bandwidth requirements
    • 5.7 - Configure and verify LLQ (class map, policy map, service policy)

  • 6.0 - Collaboration Applications - 10%

    • 6.1 - Configure Cisco Unity Connection mailbox and MWI
    • 6.2 - Configure Cisco Unity Connection SIP integration options to call control
    • 6.3 - Describe Cisco Unity Connection call handlers
    • 6.4 - Describe Cisco Unified IM&P protocols and deployment
    • 6.4.a - XMPP
    • 6.4.b - High availability
    • 6.5 - Deploy Cisco Jabber on premises

Link all’esame sul sito ufficiale 350-801 CLCOR - Implementing Cisco Collaboration Core Technologies

Reference ID: 98